- High-concerned chemical: None
- Voltage: 220 V
- Spray Type: Hot And Cold Spray
- Commodity Quality Certification: ce
- Power Source: Electric
- Brand Name: Bymaocar
- Origin: Mainland China
- Power Source: Electric
- Plug Type: EU
- Function: Hot & Cold Massager,Skin Mouisture,Skin Rejuvenation,Facial Clean,Anti Wrinkle,Skin Tightening,Dead Skin Removal
- Material: Plastic + Hardware Electronic
- More Parameters: Please refer to the description below
- Product Safety Information/Warning: WARNING: CHOKING HAZARD – Small parts. Not for Children under 3 years.
Description
Nowadays, staying up late at night and working overtime, staying in air-conditioned rooms for long periods of time, exercising resulting in a lot of sweating, etc. all accelerate the loss of skin moisture. Then you need this standing facial steamer to improve your skin. It speeds up the microcirculation of your skin and moisturizes and sterilizes. Deep cleansing, hydration, and nourishing skin care will allow you to complete a whole high-quality skincare routine at home. Don’t hesitate because your skin can’t wait!
Application
It can be used at home to allow you to achieve a skin care spa at home, and it can also be used in beauty stores to provide better quality skin care services to customers.
Specification
Material: Plastic + Hardware Electronic
Model: DT-118
Color: Black
Product Benefits: Moisturizing, Clean
Plug: EU Standard
Height Adjustment Range: 58-68cm/22.83-26.77in
Timing Time: 0-20min
Rated Power: 750w
Rated Voltage: 220v, 50Hz
Water Tank Capacity: 600ml/20.29oz
Package Size: 69*28*21.5cm/27.17*11.02*8.46in
Water Tank Size: 26*11cm/10.2*4.3in
Cup Size: 9.5*11cm/3.7*4.3in
Nozzle Jet Length: 28cm/11in
Nozzle Length: 16.5cm/6.5in
Gross Weight: 4.2kg/9.26lbs
Net Weight: 4kg/8.82lbs
Installation
1. Assemble the grooves of the two metal brackets together.
2. Assemble the thicker metal rod and plastic fittings together. It takes a little force to squeeze them together to make sure the metal rod and plastic fittings fit together completely.
3. Attach the plastic fittings to the cross stand.
4. Install the wheels after fixing the screws.
5. Fasten the smaller metal rod to the top of the thicker metal rod.
6. Assemble the corresponding holes at the bottom of the main body of the face steamer on the top of the metal rod to complete the assembly.
How to use
1. Slowly add tap water. Tap water should not exceed the top water level line, and then cover the water injection port.
2. Plug in the power supply and then press the hot spray switch.
3. Adjust the position, and wait a while to fog.
Package Included
1*Standing Facial Steamer
1*English Manual






Notes
1. Do not add herbs, fragrances, etc. directly into the water tank, which will cause the danger of spraying water.
2. Please use tap water when hot spraying. If you use distilled water, the instrument does not detect the water level will beep and then stop working.
3. Remember to tighten the water cup to prevent the water cup leakage or falling off the steam caused by burns.
4. Do not use it in uneven places. (such as pillows, beds, and bedding.)
5. Keep away from the children to prevent burns caused by steam coming out of the nozzle.
6. Please do not use the machine when you are about to fall asleep. When spraying, please be 9.84in away from the nozzle.
7. Please pour the water out of the water tank when do not use the equipment for a long time (longer than a week).
8. Please read the user manual carefully before use and pay special attention to the safety precautions included.
9. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.












Real customer reviews